Description Qty Item Price  
your basket is empty

sub total£0.00  
£ $
proceed to checkout

Presentations

stanton.pdf
KEYNOTE PRESENTATION: The Opportunities and Challenges of Delivering the Next Generation of Premium Luxury Vehicles using Virtual Engineering
Mark Stanton, Director Vehicle Engineering at Jaguar Land Rover

roberts.pdf
KEYNOTE PRESENTATION: Mass Appeal: History and Future of the A380
John Roberts, Chief Engineer at Airbus

boisot.pdf
Mutli-scale Modeling:Life Prediction Performance of Chopped and Continuous Fiber Composites Structure
Bernard Alsteens, e-Xstream Engineering

arnold.pdf
Validation of Laminated Composite Shell Elements to Coupon Test Results
Mark Arnold, Penso

augustyniak.pdf
Good Practices and Pitfalls of Finite Element Analysis Application in NDT and Failure Prevention
Marek Augustyniak, Gdansk University of Technology

biba.pdf
The Multidisciplinary Approach to Through Process Modelling of Hot Forming Coupled with Microstructure Transformation
Nikolay Biba, MICAS Simulations Ltd.

Advances Relating to Fatigue Calculations for Combined Random and Deterministic Loads
Neil Bishop, CAEfatigue Limited

blackburn.pdf
Hybrid Finite Element/Molecular Dynamics Modelling of Aluminium
John Blackburn, National Physical Laboratory

blagdon.pdf
Managing Cross-Functional and Multi-Code Materials Data at Jaguar Landrover for Robust CAE Analysis
Mark Blagdon, Jaguar Land Rover

Strength Assessment of the Iron Bridge
Carl Brooks, Ramboll UK Limited

brosch.pdf
Aerodynamic Improvement of a Racing Motorbike - Streamlining the Design Process
Sabine Brosch, Kingston University

carpentier.pdf
A Rapid Sizing Tool for Airframe Conceptual Design Studies
Alban Carpentier, LMS-Samtech

cashman.pdf
CAE Geometry: Engineering Models Built to Support Future Simulation
Tom Cashman, TranscenData Europe Ltd.

orlando.pdf
The Evaluation of the Mechanical Behaviour of a Bolted Joint Connector with Different Material Models
Michele Orlando, Expro North Sea Ltd.

chetwynd.pdf
Implementation of a lean NAFEMS QSS001 compliant QA system
Simon Chetwynd, AWE

collett.pdf
Modelling Bolted Joints, Assessment of Leak-Tight Integrity using Finite Element Based Methods
Andrew Collett, Frazer-Nash Consultancy Limited

cueva_de_leon.pdf
Using Multiphysics to Predict Powertrain Bore Distortion
Jose Maria Cueva De Lion, Altair Engineering, Inc.

walsh.pdf
Optimising Expected Improvement
Sarah David, Alstom Power

fairfull.pdf
Simulation Data Management – The Materials Perspective
Arthur Fairfull, Granta Design Ltd.

gambling.pdf
The Commericial and Performance Benefits of Applying Structural Optimisation
Martin Gambling, GRM Consulting Ltd.

georgescu.pdf
Open-Source Software for Industrial CAE – A Case Study in Unstructured Meshing
Serban Georgescu, Fujitsu Laboratories of Europe

Understanding Vibration Damping
Hugh Goyder, Cranfield University

graham.pdf
EPCC: Supporting Continued Professional Development in Data and Computational Science
George Graham, University of Edinburgh

green.pdf
Rolls-Royce view on Current Applications and Future Developments in Finite Element Analysis
E. Green, Rolls-Royce Plc.

gulavani.pdf
Analysis Led Design of a Novel Aircraft Seat
Omkar Gulavani, Cranfield University

halfpenny.pdf
Obtaining Loads for Design Simulation and Qualification testing of Vibrating Equipment on Aircraft
Andrew Halfpenny, HBM-nCode Products

harman.pdf
Enhancing a 3D CAEProcess with Modelica Based System Simulation
Peter Harman, CyDesign Ltd.

hill.pdf
Britain's Fastest Ever Cyclist - Powered by a NAFEMS Member!
J. Hill, Dynamiq Engineering Ltd.

horgan.pdf
Pushing the Boundaries of UpFront CFD
Sean Horgan, 8020 Engineering Ltd.

howard.pdf
Software Engineering Collaboration – A Response to the Ever Increasing Splintering of Engineering Specialisms
Peter Howard, Altran UK

hunt.pdf
A Real-Time Approach to Thermo-Fluid Networks in Control System Development
David Hunt, Flowmaster

karadelis.pdf
“Green” Overlays. A New, Environmentally Friendly Method for the Structural Repair of Damaged Concrete Pavements
John Karadelis, Coventry University

reynolds.pdf
Finite-Element Updating of the University of Exeter Forum Walkway
Vasileios Karakonstantis, The University of Exeter

kashyap.pdf
Implementing a Big Data Engineering Solution Across a Distributed Supercomputing Network
Sid Kashyap, HPC Wales

keating.pdf
An Accurate, Extensive and Rapid Method for Aerodynamics Optimisation: The 50:50:50 Method
Mark Keating, ANSYS, Inc.

ma.pdf
A Coupled CFD and Structural Analysis of a Solid Target for Target Station 2 of the Isis Neutron Facility
Yanling Ma, Rutherford Appleton Laboratory

colbertaldo.pdf
Mesh Morphing and Optimization of Transonic Wings
Asim Majid, iChrome Ltd.

margetts.pdf
General Purpose Finite Element Analysis of Problems with Billions of Unknowns
L. Margetts, University of Manchester

marks.pdf
Driving Adoption of Simulation in the Design Environment - How Far Can You Go?
Laurence Marks, Strategic Simulation & Analysis Ltd.

marriott.pdf
Solving for Fuel Tank Sloshing Noise
Douglas Marriott, MSC.Software Ltd.

mistry.pdf
Finite Element Analyses of an Instrument Guide Tube within a Superheater Header Subject to Cyclic Pressure and Thermal Transient Loadings
Pritesh Mistry, AMEC

mosquera.pdf
Integrating Model Based Systems Engineering Tools with Engineering Analysis to Improve Overall Engineering System Design
Anthony Mosquera, Applied Computing & Engineering Limited

nguyen.pdf
Simulation of a New Cold Roll Process and Products in Metal Forming Industry
Bac Nguyen, Hadley Industries PLC

nixon.pdf
The Automation of Bolted Assemblies
Stuart Nixon, Dassault Systemes UK Ltd.

cordingley.pdf
Beyond the Lagrangian –Advanced Analysis Techniques for Modelling Extreme Deformation and Fluid Flow
Stuart Nixon, Dassault Systemes UK Ltd.

Application of the CAD-Embedded CFD Code for the Investigation of the London Skyscraper’s Damaging Effect
John Parry, Mentor Graphics Corp.

pinning.pdf
Forging Engagement between N8 HPC and Industry
Robin Pinning, University of Manchester

prior.pdf
Simulation in Product Design: Current and Future Challenges
Alan Prior, Dassault Systemes UK Ltd.

rawson.pdf
Multi-Scale Finite Element Modelling to Assess Sutured Tendon Repairs
Shelley Rawson, University of Manchester

richards.pdf
SES: Steering 300 plus GPUs to get a result
Andrew Richards, University of Oxford

rogers.pdf
Implied Validity of Simulation Results
Chris Rogers, CREA Consultants Limited

said.pdf
Simulation-Based-Solution for Hot-Stamping
Rajab Said, ESI Group

shahzad.pdf
Method of Running Multidiscipline Coupled Simulation
Faisal Shahzad, MSC.Software Ltd. 

kane.pdf
Internal Erosion Prediction through CFD for Subsea Pipework
Carlos Sicilia, INTECSEA UK Ltd.

pappas.pdf
Introducing a New Framework for Effective Data, Resources and CAE Workflow Process Management
Maria Stampouli, BETA CAE Systems

sykes.pdf
Structural Analysis of the Mid Infra-Red Instrument for the James Webb Space Telescope
Jon Sykes, University of Leicester

chappell.pdf
Discrete Flow Mapping -A Mesh Based Simulation Tool for High-Frequency Vibro-Acoustics of Complex Engineering Structures
Gregor Tanner, University of Nottingham

taylor.pdf
CloudSME Project Opens New Gateway to HPC Support for Simulation Software
Simon Taylor, Brunel University

hutabarat.pdf
Survey on the use of Computational Optimisation in UK Engineering Companies
Ashutosh Tiwari, Cranfield University

tonello.pdf
Testing and Validating Open Source CFD for Thermal Comfort
Nicolas Tonello, Renuda UK

veltri.pdf
An FEM/MBS Technique for Stress Concentration Prediction and Accelerated Fatigue Simulation
Marco Veltri, Southampton University

wilkinson.pdf
Confronting Data with Simulations: Examples from DiRAC on the use of Large Model Generation
Mark Wilkinson, University of Leicester

wolf.pdf
Thermal  Analysis of a Three Phase Transformer by Coupled Simulation
Klaus Wolf, Fraunhofer Institut SCAI

Numerical Modelling of Trapped Air in Engine Jacket Cooling Systems
Peter Woollen, Frazer-Nash Consultancy Ltd.