Description Qty Item Price  
your basket is empty

sub total£0.00  
£ $
proceed to checkout

Practical Stress Analysis & Finite Element Methods

An opportunity to ensure that your organisation gets maximum benefit from using FEA

Three day course -
June 3rd, 4th and 5th 2008

FEA has become widely used and universally accepted in many industry sectors. In order to derive maximum benefit from the available technology, engineers should learn about the many strengths of numerical techniques. At the same time, recommendations on how to avoid the inevitable pitfalls will prove invaluable at a later date.

NAFEMS, the only independent not-for-profit organisation with the aim of promoting the effective and reliable use of FEA, addresses this requirement by providing this three day example-driven, practical course. The course offers excellent guidance on how to judge which approximations are acceptable and appropriate for solving a wide range of practical problems. Of equal importance is the manner in which the results are interpreted. Advice is provided which allows the correct decisions to be taken, based on results which are known to be reliable. Interaction is encouraged throughout the course, with the planning and design of a complete FEA project and examples of simple hand calculations, mesh designs and solution designs being set for the class to complete. The course is completely code independent.


Who Should Attend?

This course is aimed at practising engineers who wish to learn more about how to apply finite element techniques to their particular problems in the most effective manner. The material that is presented is independent of any particular software package, making it ideally suited to current and potential users of all commercial finite element software systems. This course is a must for all engineers aiming to use FEA as a reliable predictive tool for thermal, stiffness and stress analysis.

The course is open to both members and non-members of
NAFEMS.

Course Programme

Day 1

  • Basic Theory of FEA
  • Direct Stress and Strain
  • Shear Stress and Torsion
  • Bending Stress
  • Thermal Stress Effects
  • Stress Concentration Effects
  • Fatigue and Impact
  • Properties of Materials
  • Stiffness Calculations
  • Units and Unity Bracket

Day 2

  • Introduction to 1D FEA
  • Introduction to 2D Methods
  • 2D Plane Stress/Plane Strain
  • 2D Axi-Symmetric Problems
  • Introduction to the Real World in 3D
  • Example of Simple 3D Analysis
  • Processing of 3D CAD Data
  • Preparing CAD Data for Analysis
  • Fast and Accurate Meshing Methods

Day 3

  • Design of Loading and Constraints
  • Representative Material Properties
  • Results Interpretation/Verification
  • Balanced Loads/Minimal Constraint
  • Non-Linear Considerations
  • Introduction to Plasticity in FEA
  • Introduction to Contact in FEA
  • Best Practice in Industry
  • Getting Help When Things Go Wrong

Course Tutor

Bob Johnson - DAMTBob Johnson has presented courses on behalf of NAFEMS for over 10 years, and is recognised as one of the leading figures in the engineering analysis community in the UK. Bob is a well-respected consultant with a wealth of industrial experience.

His lively presentation style puts over the key concepts in a manner which involves participants fully in the course material.

He is also a qualified NAFEMS Registered Analyst at Advanced Level. In addition to being a regular contributor at international conferences, Bob is also a member of the NAFEMS Education & Training Working Group and Technical Editor of the BENCHmark magazine .

Venue

Empower Training Services Limited
Ratcliffe Energy Centre
Ratcliffe-on-Soar
Nottingham
NG11 0EG

Tel: +44 (0)115 983 2900

Email: enquiries@empower-training.com

Map & Directions:

http://www.empower-training.com/contact_us/map_01.htm

 

Local hotels :-

Use Empower’s Accommodation Service, please see http://www.empower-training.com/accommodation.htm or

www.whitehousehotel s.com

http://book.bestwestern.com/bestwestern/selectHotel.do

http://www.village-hotels.co.uk/hotels/Nottingham/default.aspx?linkid=InteractiveMap


Your comments


Add your comments

Anonymous on 30th September 2014 - 7:52 pm
Your rating:

Purchasing Details

Members Price
£630 | $1023 | €805


Non-Members Price
£945 | $1534 | €1208
Order Ref: JUN08
Event Type: Course
Location: Ratcliffe on Soar UK
Date: June 3, 2008

33% Discount for Members - NAFEMS Members can attend this course at a significantly discounted rate. Members can also attend a number of seminars and workshops free of charge each year as part of their membership, as well as a library of free publications on joining. If you are a NAFEMS member, please login above to take advantage of these free places and discounted prices. If you are not a member, click here to read more about the benefits of getting involved. Get Involved. Join NAFEMS Today.