Practical Stress Analysis & Finite Element Methods
Three day course -
12th, 13th and 14th May 2009
FEA has become widely used and universally accepted in many industry sectors. In order to derive maximum benefit from the available technology, engineers should learn about the many strengths of numerical techniques. At the same time, recommendations on how to avoid the inevitable pitfalls will prove invaluable at a later date.
NAFEMS, the only independent not-for-profit organisation with the aim of promoting the effective and reliable use of FEA, addresses this requirement by providing this three day example-driven, practical course. The course offers excellent guidance on how to judge which approximations are acceptable and appropriate for solving a wide range of practical problems. Of equal importance is the manner in which the results are interpreted. Advice is provided which allows the correct decisions to be taken, based on results which are known to be reliable. Interaction is encouraged throughout the course, with the planning and design of a complete FEA project and examples of simple hand calculations, mesh designs and solution designs being set for the class to complete. The course is completely code independent.
Who Should Attend?
This course is aimed at practising engineers who wish to learn more about how to apply finite element techniques to their particular problems in the most effective manner. The material that is presented is independent of any particular software package, making it ideally suited to current and potential users of all commercial finite element software systems. This course is a must for all engineers aiming to use FEA as a reliable predictive tool for thermal, stiffness and stress analysis.
The course is open to both members and non-members of
Basic Theory of FEA
Direct Stress and Strain
Shear Stress and Torsion
Thermal Stress Effects
Stress Concentration Effects
Fatigue and Impact
Properties of Materials
Units and Unity Bracket
Introduction to 1D FEA
Introduction to 2D Methods
2D Plane Stress/Plane Strain
2D Axi-Symmetric Problems
Introduction to the Real World in 3D
Example of Simple 3D Analysis
Processing of 3D CAD Data
Preparing CAD Data for Analysis
Fast and Accurate Meshing Methods
Design of Loading and Constraints
Representative Material Properties
Balanced Loads/Minimal Constraint
Introduction to Plasticity in FEA
Introduction to Contact in FEA
Best Practice in Industry
Getting Help When Things Go Wrong
Bob Johnson has presented courses on behalf of NAFEMS for over 10 years, and is recognised as one of the leading figures in the engineering analysis community in the UK. Bob is a well-respected consultant with a wealth of industrial experience.
His lively presentation style puts over the key concepts in a manner which involves participants fully in the course material.
Holiday Inn Coventry-South
Ryton On Dunsmore
Coventry, CV8 3DY
We have secured a limited amount of rooms at the venue hotel, at a special rate of £90, including VAT on a bed & breakfast basis. Please contact the hotel directly to book rooms at the discounted rate.
Direct tel. no: 02476 212306
Fax: 02476 301610
Delegates must always quote NAFEMS when booking to get the preferred rate and must book at least 28 days prior to arrival. After this all rates will be subject to availability.
£640 | $1049 | €772
£960 | $1573 | €1157
Order Ref: UKCOURSE_MAY09
Event Type: Course
Location: Midlands UK
Date: May 12, 2009
An opportunity to ensure that your organisation gets maximum benefit from using FEA
Events - Cancellation Policy
Please note NAFEMS cancellation policy for all UK events is as follows:-
- Cancellation up to 3 weeks before the event date: free of charge;
- Cancellation up to 1 week before the event date: 75% of registration fee non-refundable;
- Cancellation up to 1 week before the event date: all seminar credits non-refundable;
- No show at the event: 100% of registration fee non-refundable;
NAFEMS will discuss the possibility of transferring to an alternative event/course, however an administration charge will be applicable.
This policy is subject to change.