Practical Introduction to FEA
An opportunity to ensure that your organization gets
maximum benefit from using FEA
3-Day Training Course : Introduction to FEA Analysis
FEA has become widely used and universally accepted in many industry sectors. FEA is a powerful technique, able to produce solutions to challenging structural analysis problems. The technology and computational efficiency of the method, together with the rapid increases in computer processing power means that today the scope and size of simulations far exceeds the capabilities of even a few years ago.
However for those engineers embarking on FEA, or companies adopting the technique to improve designs or achieve certification of new products, there is a steep learning curve to overcome.
There are a bewildering array of element types, solution types, meshing methods and pre-post processing options that have to be faced. This is before we get down to the engineering physics behind the problem, with associated classic traps and errors. What is needed is guidance via a thorough but practical assessment of the method and how to use it in the real world.
NAFEMS, the only vendor neutral, not-for-profit organization with the aim of promoting the effective and reliable use of FEA, addresses this requirement by providing this three day example-driven, practical course.
Students are shown the background to the FEA methodology, via simple real examples with a minimum of theory. The strength and weaknesses of the various FEA techniques are shown and discussed. Practical considerations of loadings, boundary conditions and structural details are shown by numerous examples.
The assessment, validation and interpretation of FEA results are vital for delivering safe, effective products. A process is shown which provides confidence in the results and aims to provide conservative, reliable and qualified results. The attendees join in the activity of building this process themselves and come away with an embryo Procedural Check List
Interaction is encouraged throughout the course. Real world examples are given at every stage, drawn from the Tutors wide practical experience. Questions are very welcome, as this is one of the key aspects of making this a unique experience for each attendee. Attendee project examples can often be incorporated into the class as time permits, to benefit all. Role playing situations include the class acting as a syndicate to evaluate a Design Failure, critical assessment of an FE Report and the continuous evolution of the Check List.
The course is completely code independent, attendees are welcome to bring laptops to take notes, but they are not required.
A full set of printed and bound notes will be issued to every attendee.
Who Should Attend?
This course is aimed at practicing engineers who wish to learn more about how to apply finite element techniques to their particular problems in the most effective manner. The material that is presented is independent of any particular software package, making it ideally suited to current and potential users of all commercial finite element software systems. This course is a must for all engineers aiming to use FEA as a reliable predictive tool for thermal, stiffness and stress analysis.
Companies moving into FEA technology to improve product designs or assess prototype failures or speed the design process will benefit from sending key engineers to this course. If you have sufficient engineers then a tailor made course may be more suitable. NAFEMS can then work closely with you to cater for your specific industry sector or analysis type.
The course is open to both members and non-members of NAFEMS.
Registration will be held on Tuesday morning between 9:00 and 9:30am. We will aim to commence the course at 9am on Wednesday and Thursday and finish by 5pm each evening.
Background to FEA
- Origins of FEA , leading to today’s process
- Emphasis on limitations of a displacement solution
- The route from CAD to Mesh to Solver to Results
- A simple case study – a plate with a hole
- The Analysis Input file
- Simple Element stiffness matrices
- Grid Points , Degrees Of Freedom (DOFs)
Over view of Element Types
- 1d elements
- 2d elements
- 3d elements
- Solid 3D elements: Hex versus Tets, the trade off
- Types of meshing and meshing issues
- I-beam example spanning element types
Making healthy models
- Mis-matched DOF’S and other issues
- Element distortions – effect on accuracy
- Convergence checking
- Solver and Preprocessor checking
- Post processor checking and the dangers of smoothing
- Stress concentrations and stress singularities
- Window cutout example
- Building an Analysis Process ‘Cheat Sheet’ Part 1
- Constraint methods
- Real world boundary conditions
- Poisons effect
- Minimum support 321 method
- Case Study – bracket analysis
- Linear Contact methods – new technology to supplement constraints
- Distributed load, Point Loading
- Real world loading versus FEA
- Bearing load methods
- Nonlinear implications
- Centrifugal and Inertial Loading
- Unit load cases for better understanding
- Case Study – tanker body under cornering and accident loading
Multi Point Constraints (MPCs)
- What are they and why use them?
- Different terminologies and usage
- Soft and rigid load and constraint distribution
Making Life simpler
- Anti-symmetry and Axi-symmetry
- Sector Symmetry
- Plane Stress
- Plane strain
- Comparing 1d, 2d, 3d modeling case study of a pressure vessel
Understanding the objective of the analysis
- Clear view of scope of problem – how do we tackle it
- Resource and timescale factors
- FEA Analysis objectives – reservoir case study
- Class exercise develop an analysis strategy
Looking at CAD geometry
- Why not use 20 million elements
- Trade offs
- The reality of CAD models
- Manual methods of meshing
- Building an Analysis Process ‘Cheat Sheet’ Part 2
- Anticipate the load paths
- Free body Diagrams
- Force Balance
- Review of Stress and Load fundamentals
- Revisiting the I-Beam, comparing theory with FEA
Checking the answers
- Ways of checking the results
- What type of stress do I use?
- Review of fundamentals
- Post Processing and More Checking
- Other Checks
- Class Exercise – review an FE report
Other Topics (dependent on requirements)
- Introduction to Non-linear Analysis
- Introduction to Dynamics and Normal Modes Analysis
- Introduction to Composite Analysis
- Review of the Class exercise – developed Analysis Process ‘Cheat Sheet’
Just off the M40, the beautiful Warwickshire countryside is on the doorstep, although with famous theatres, Shakespeare's houses and the River Avon all within walking distance, you'll want to arrange your return visit before you've even left. The hotel is only 28 miles from Birmingham International Airport.
We have secured a limited number of rooms at the venue hotel, at a special rate of £99, including VAT on a bed & breakfast basis. Please contact the hotel directly, advising reservations that you are attending a NAFEMS course, to book rooms at the discounted rate. This reduced rate is applicable to NAFEMS delegates until four weeks prior to course date.
£750 | $1204 | €949
£1120 | $1798 | €1417
Order Ref: uk_mar14
Event Type: Course
Location: Stratford upon Avon UK
Date: March 18, 2014
Special discounts are being made available to members for this course. For more information on joining NAFEMS, please visit our membership section .
Shakeel has been using finite element techniques in structural engineering applications for over 15 years. As a Principal Engineer within a FEA consultancy firm, he has been exposed to a broad range of industries using statics, dynamics and heat transfer analyses to obtain solutions to engineering problems.
During this period, Shakeel has developed and presented training courses in the application of the finite element method to all levels of engineers. From general introductory courses through to specific software based training.
With a background in aerospace engineering, Shakeel has been involved in a number of projects assessing the behaviour of structures manufactured from composite materials. Maintaining high standards in quality and presentation have been important throughout his career.
Events - Cancellation Policy
Please note NAFEMS cancellation policy for all UK public training courses is as follows:-
- Suitably qualified delegates may be substituted at any time prior to the start of the course
- Bookings are accepted upon condition that either full payment is received before the course commences, or that a valid purchase order is received from a company that has a credit agreement with us
- In the event of a delegate being unable to attend a course that they have booked upon then, NAFEMS will discuss the possibility of transferring to an alternative course. However, a suitable administration charge will be levied.
- A refund of 50% of the course fees will be paid to delegates who cancel their booking and do not re-schedule to an alternative course, provided that the cancellation is received by NAFEMS at least four weeks in advance of the course. No refunds can be given for cancellations made after this time.
- NAFEMS reserves the right to cancel the course, without liability, in which case all training fees will be refunded in full. However, NAFEMS cannot be held liable for any other expenses incurred by participants or their companies due to the cancellation.
NAFEMS will discuss the possibility of transferring to an alternative event/course, however an administration charge will be applicable.
For full terms and conditions, click here. This policy is subject to change.