Data Exchange
Tips and Workarounds for CAD Generated Models
Tips and Workarounds for CAD Generated Models Marks, L First Published - January 1999 Revised and Republished - August 2008 Softback - 51 Pages This book is an update of a previous document by the same name, written almost ten years ago. During the intervening period the world of analysis has moved on, especially in more
Members Price:£7 | $11 | €9
Non-Members Price:£18 | $28 | €22
State of the Art Review in CAE Data Management
Grau Published March 2007 Softback, 28 Pages The effort required for the management of simulation data is increasing with the amount and complexity of information that is manipulated in the CAE context. Implementation of Product Data Management (PDM) today is largely restricted to product design, where CAD tools have relatively homogeneous more
Members Price:£32 | $50 | €39
Non-Members Price:£65 | $101 | €79
Product Data Management and The Engineering Analysis Environment
Vaughan, C, First Published - October 2001 Softback - 39 Pages The purpose of this document is to provide a basic introduction to Product Data Management (PDM) and Configuration Management (CM) for people working in the Engineering Analysis arena. It describes how the integration of all these areas could bring business benefits. more
Members Price:£200 | $308 | €241
Non-Members Price:£300 | $462 | €361
How To Use STEP Geometry for Engineering Analysis
Goult, R, and Greenfield, D First Published - January 1999 Softback - 48 Pages This guide is aimed at: System managers who are implementing and supporting data exchange by purchasing STEP interfaces; Users who want to communicate with customers and/or suppliers about using STEP for data exchange. It covers: What STEP interfaces more
Members Price:£7 | $11 | €9
Non-Members Price:£18 | $28 | €22Report on the Vendor Challenge
NAFEMS First Published - January 1999 Softback - 54 Pages The NAFEMS CAD/FE Integration Working Group is concerned to advance the general vision CAD (Computer Aided Design) Geometry from any source may be used to create an Engineering Analysis Model of any type. Except in the most trivial cases, even data exchange between similar more
Members Price:£25 | $39 | €31
Non-Members Price:£250 | $385 | €301Report on Solution of Users' Problems
Bohms, H M First Published - January 1997 Softback - 60 Pages This report has been prepared as part of a CEC funded ESPIRIT project. The project, to develop a Generic Engineering analysis Model (GEM), is managed by NAFEMS. Thanks are due to the members of the project consortium for their input to the project and this report. more
Members Price:£25 | $39 | €31
Non-Members Price:£200 | $308 | €241
How To Integrate CAD & Analysis
NAFEMS First Published - January 1997 PDF on CD Even though the integration of design and analysis activities has been, and continues to be, the subject of much development, the Working Group feels that the time is now right to describe what techniques are generally available to industry and to provide some insight into what is to come. more
Members Price:£7 | $11 | €9
Non-Members Price:£18 | $28 | €22Improving Integration in Engineering Analysis
Helpenstein, H First Published - January 1997 Softback - 32 Pages Engineering analysis can be currently characterised as a collection of specific tasks, the solution methods of which vary depending on the available analysis tools. End users are, however, primarily interested in getting their problems solved, without needing more
Members Price:£25 | $39 | €31
Non-Members Price:£200 | $308 | €241The GEM Modelling Methodology
Bohms, H M First Published - February 1995 Softback - 112 Pages This GEM deliverable D1201 describes the Modelling Methodology adopted by and applied in the ESPIRIT Project No. 8894 – GEM. GEM is the acronym for Generic Engineering-analysis Model. The methodology can be applied to integrate software applications in the context more
Members Price:£25 | $39 | €31
Non-Members Price:£100 | $154 | €121Data Requirements for Analysis Modelling
Le Gouez, J M, Boheas, M A, and Miles, C J First Published - January 1995 Softback - 36 Pages This book defines the problem and analysis disciplines that are part of the GEM model. It explores the data requirements for generic modelling and simulation of field problems in industry. The first chapter concentrates on the objectives of the more
Members Price:£25 | $39 | €31
Non-Members Price:£200 | $308 | €241A Guide to Shape Models & Relevant Resource Parts in STEP
Goult, R, Leal, D, and Helpenstein, H First Published - January 1995 Softback - 66 Pages ISO 10303, commonly known as STEP is the international standard for the representation and exchange of product model data using computer systems. The scope includes many application areas and it is intended to cover the complete life cycle of a more
Members Price:£25 | $39 | €31
Non-Members Price:£250 | $385 | €301Specification of Demonstration Problems
Zilly, F First Published - January 1995 Softback - 42 Pages This document describes example problems for GEM which are compiled from project partners. These examples are considered by the partners for their own application of GEM, and are foreseen as (internal) validation samples at their site during the GEM development processes. more
Members Price:£25 | $39 | €31
Non-Members Price:£150 | $231 | €181
Data Exchange In Finite Element Analysis - A Functional Requirement Specification
Data Exchange In Finite Element Analysis - A Functional Requirement Specification Aas, J First Published - July 1992 Softback - 174 Pages The exchange of data between different finite element systems is achieved to different levels of success by using product specific, product independent or standard (eg IGES, SET etc) data formats. The more
Members Price:£22 | $34 | €27
Non-Members Price:£54 | $84 | €65