ANSYS Accelerates Student Team to Finish Line
University of Waterloo Formula Motorsports Team Wins Award in FSAE Competition through Use of ANSYS Engineering Simulation Software
SOUTHPOINTE, Pa., Oct 08, 2009 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS), a global innovator of simulation software and technologies designed to optimize product development processes, today announced that the University of Waterloo Formula Motorsports team leveraged software from ANSYS in developing an innovative, award-winning air intake restrictor for a race car engine. The student team used a design of experiments procedure within ANSYS(R) software to identify the best design candidates without building a prototype. The final result was improved air intake, enhanced overall engine performance and reduced exhaust emissions -- along with a shortened development time and lower costs. For its efforts in developing the process, the Waterloo team received the Formula SAE(R) (FSAE) CFdesign(R) Computational Fluid Dynamics (CFD) Award, which recognizes the best implementation of CFD as a design tool.
The Formula SAE competition, organized by the automotive engineering society SAE International, promotes careers and excellence in engineering to college students worldwide. Teams build scaled-down formula-style autocross vehicles throughout the school year and test them at annual competitions, which judge static (such as design and cost analysis) and dynamic (including acceleration and endurance) components. The University of Waterloo team, hailing from one of Canada\'s premier engineering schools, has participated in the FSAE competition for 21 consecutive years.
The competition rules limit engine power by requiring air for engine combustion to pass through a hole (or restrictor) of 20 millimeters. Optimizing the flow of air through the intake geometry is crucial in providing the desired engine performance. The University of Waterloo team saw the opportunity for innovation and set out to modify the wall geometry to maximize pressure recovery through the restrictor. Using software from ANSYS to perform a fluid dynamics study, the team developed a design that helped improve the overall performance of the engine by boosting the flow of air, therefore increasing combustion efficiency while reducing emissions. The final design, culled from a design of experiments process that automatically obtains solutions based on a range of input parameters, improved pressure recovery by 4 percent.
\"Fluid flow simulation is a vital tool for engine system developers,\" stated intake system designer Anish Ganesh, an engineering student at the University of Waterloo. \"Formula Motorsport teams do not have the time or resources to construct full-size prototypes restrictors, test them and make revisions to their designs. Other than performing expensive and time-consuming physical flow-bench tests, engineering simulation is the most useful tool for intake designers. The team\'s partnership with ANSYS is invaluable in our quest to develop a winning car.\"
ANSYS has partnered with FSAE by providing its engineering simulation software to students who participate in the competition. Currently, nearly 50 university teams use software from ANSYS to design their formula cars.
\"ANSYS is committed to working with universities in many ways,\" said Paul Lethbridge, academic product strategy and planning manager at ANSYS, Inc. \"Extending the use of ANSYS products for research and teaching has been an important part of the Company\'s history. In addition, there are a number of exciting projects, such as Formula SAE, that take students out of the classroom and allow them to apply textbook theories to real work experiences. These activities give them a great foundation in using Smart Engineering Simulation(TM) tools that they will employ throughout their careers.\"
For downloadable images, visit http://www.ansys.com/newsimages.
About University of Waterloo Formula Motorsports
The Formula SAE team, representing University of Waterloo, one of Canada\'s premier engineering schools, is an educational engineering project undertaken by over 40 student members on an annual basis. As a part of the learning experience, the team is challenged by the University to raise its own funding for the entire year through corporate sponsors and donors. Fully sanctioned by the University of Waterloo, the team is supervised by both the Department of Mechanical & Mechatronics Engineering and the Faculty of Engineering. For more information, visit http://fsae.uwaterloo.ca/.
About Formula SAE and SAE International
Formula SAE is a student design competition organized by SAE International (formerly Society of Automotive Engineers). Each student team designs, builds and tests a prototype based on a series of rules whose purpose is both to ensure onsite event operations and promote clever problem solving. The competition is staged by SAE International, a global society of more than 121,000 engineers and related technical experts in the automotive, aerospace and commercial-vehicle industries. SAE International\'s core competencies are life-long learning and standards development.
About ANSYS, Inc.
ANSYS, Inc., founded in 1970, develops and globally markets engineering simulation software and technologies widely used by engineers and designers across a broad spectrum of industries. The Company focuses on the development of open and flexible solutions that enable users to analyze designs directly on the desktop, providing a common platform for fast, efficient and cost-conscious product development, from design concept to final-stage testing and validation. The Company and its global network of channel partners provide sales, support and training for customers. Headquartered in Canonsburg, Pennsylvania, U.S.A., with more than 60 strategic sales locations throughout the world, ANSYS, Inc. and its subsidiaries employ over 1,600 people and distribute ANSYS products through a network of channel partners in over 40 countries. Visit www.ansys.com for more information.
ANSYS, ANSYS Workbench, Ansoft, AUTODYN, CFX, FLUENT, and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. All other brand, product, service and feature names or trademarks are the property of their respective owners.
SOURCE: ANSYS, Inc.
Media: Kelly Wall, 724-514-3076
Investors: Annette Arribas, 724-514-1782
Copyright Business Wire 2009
Date: October 8, 2009