VSE Tunes Up Flowmeters Virtually with ANSYS Engineering Simulation Software
Improvements to Critical Fluid Flow Measurement Devices Result in Reduced Wear and Tear
SOUTHPOINTE, Pa., Oct 12, 2009 (BUSINESS WIRE) -- ANSYS, Inc. (NASDAQ: ANSS), a global innovator of simulation software and technologies designed to optimize product development processes, today announced that German flowmeter manufacturer VSE Volumentechnik GmbH uses tools from ANSYS to improve the performance of its industrial flowmeters. Fluid dynamics analysis enabled the company to virtually identify and troubleshoot specific noise, vibration and pressure loss problems, resulting in the elimination of excessive gear wear and worker discomfort. VSE\'s flowmeters are used to measure critical fluid flows in a wide range of applications, from pharmaceutical processing to power generation to automotive manufacturing.
\"Because our instruments are designed to operate in small, fluid-filled spaces, it is difficult to analyze them under actual working conditions,\" said Axel Vedder, technical director at VSE Volumentechnik. \"Software from ANSYS allowed us to assess the performance of our flowmeters in a virtual environment that accurately replicated real-world operating conditions. We were able to quickly identify, and address, the relevant design issues.\"
Flowmeters designed by VSE help customers around the world to ensure that their technical systems and processes are running smoothly, by measuring such fluid characteristics as volume flow rates, pressure, temperature and materials concentrations. These sensitive measurement systems indicate whether hydraulics are operating under optimal conditions, whether pipelines are running at maximum capacity, and whether additives are being properly injected into primary fluids -- among many other industrial applications.
While there are many ways to measure fluid flows, VSE instruments are based on the positive displacement principle. The company\'s flowmeters include a pair of gears that are continually rotated by fluid flows. As these gears rotate, they produce an output frequency that corresponds to a specific flow rate. Gear-based flowmeters represent a precise and efficient system for measuring fluid characteristics, but have traditionally included some application drawbacks -- specifically, noise, vibration and pressure loss created by the constantly spinning gears. This can cause discomfort for personnel working nearby as well as excessive wear on flowmeter gears and bearings.
Using simulation software from ANSYS, VSE has been able to address these user concerns and introduce new product features that have significantly reduced its flowmeters\' noise output, vibration and negative pressure effects. Meshing technology from ANSYS enabled product engineers at VSE Volumentechnik to create three-dimensional virtual models of flowmeters, and then animate gear movement within a typical customer application. Engineers were then able to isolate those gear surface segments that were creating the greatest torque -- and thus making the largest contribution to noise, vibration and pressure loss. The German firm intends to continue using software from ANSYS to assess and improve specific aspects of its product designs -- with the goal of optimizing the performance of its flowmeters, creating a significant competitive advantage and potentially creating new applications for its innovative fluid measurement technologies.
\"There is little room for error in this industry, as many industrial processes around the world rely upon highly accurate fluid flow measurement. To fulfill this demand, flowmeters must meet stringent requirements and be robust and reliable, all while providing precise measurements,\" said Dipankar Choudhury, vice president, corporate product strategy and planning at ANSYS, Inc. \"The design enhancements that VSE engineered are certain to have a far-reaching impact. ANSYS technology has helped this leading instrument manufacturer to virtually assess all the detailed aspects of its products, under real-world operating conditions, and then arrive at design improvements that will only reinforce its leadership position.\"
For downloadable images, visit http://www.ansys.com/newsimages.
About VSE Volumentechnik GmbH
Based in Neuenrade, Germany, VSE Volumentechnik supplies its worldwide customers with highly precise flowmeters that represent both high quality standards and short development times -- as well as expert customer service and support. Flowmeters from VSE Volumentechnik are installed worldwide in technical process plants in the plastics, chemical, pharmaceutical, paints and inks, hydraulic, and automotive industries, among other applications. The company\'s flowmeters deliver highly precise flow measurement results for virtually all pumpable media. Applications include flow measurement, hydraulic systems, precision dosing, system monitoring, and the open-loop control of mixed fluid ratios. VSE Volumentechnik\'s expert knowledge of both customer needs and application/market requirements form a solid basis for highly innovative and efficient products.
About ANSYS, Inc.
ANSYS, Inc., founded in 1970, develops and globally markets engineering simulation software and technologies widely used by engineers and designers across a broad spectrum of industries. The Company focuses on the development of open and flexible solutions that enable users to analyze designs directly on the desktop, providing a common platform for fast, efficient and cost-conscious product development, from design concept to final-stage testing and validation. The Company and its global network of channel partners provide sales, support and training for customers. Headquartered in Canonsburg, Pennsylvania, U.S.A., with more than 60 strategic sales locations throughout the world, ANSYS, Inc. and its subsidiaries employ over 1,600 people and distribute ANSYS products through a network of channel partners in over 40 countries. Visit www.ansys.com for more information.
ANSYS, ANSYS Workbench, Ansoft, AUTODYN, CFX, FLUENT, and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. All other brand, product, service and feature names or trademarks are the property of their respective owners.
SOURCE: ANSYS, Inc.
Kelly Wall, 724-514-3076
Annette Arribas, 724-514-1782
Copyright Business Wire 2009
Date: October 12, 2009