An opportunity to ensure that your organization gets
maximum benefit from using Finite Element Analysis
3-Day Training Course : Introduction to FEA Analysis
FEA has become widely used and universally accepted in many industry sectors. FEA is a powerful technique, able to produce solutions to challenging structural analysis problems. The technology and computational efficiency of the method, together with the rapid increases in computer processing power means that today the scope and size of simulations far exceeds the capabilities of even a few years ago.
However for those engineers embarking on FEA, or companies adopting the technique to improve designs or achieve certification of new products, there is a steep learning curve to overcome.
There are a bewildering array of element types, solution types, meshing methods and pre-post processing options that have to be faced. This is before engineers get down to the engineering physics behind the problem, with the associated classic traps and errors. What is needed is guidance via a thorough but practical assessment of the method and how to use it in the real world.
NAFEMS, the only vendor neutral, not-for-profit organization with the aim of promoting the effective and reliable use of FEA, addresses this requirement by providing this three day example-driven, practical course.
Attendees are shown the background to the FEA methodology, via simple real examples with a minimum of theory. The strength and weaknesses of various FEA techniques are shown and discussed and practical considerations of loadings,boundary conditions and structural details are shown via examples.
The assessment, validation and interpretation of FEA results are vital for delivering safe, effective products are discussed to provide confidence in the results obtained aiming to provide conservative, reliable and qualified results. The attendees join in the activity of building this process themselves and come away with an embryo Procedural Check List. Report writing is also addressed as a class workshop.
The course offers excellent guidance on how to assess and plan the task of carrying out a Finite Element Analysis. A clear understanding of the objectives of each analysis is vital and a road map for achieving this is presented. A review of the trade off between available resource and analysis methodology is given.
Interaction is encouraged throughout the course. Real world examples are given at every stage, drawn from the Tutors wide practical experience.Questions and class participation are encouraged, as this is one of the key aspects of making this a unique experience for each attendee. Attendee project examples can often be incorporated into the class if time permits, to benefit all.
The course is completely software independent and attendees are welcome to bring laptops to take notes, but they are not required.
A full set of printed and bound notes will be issued to every attendee.
This course is aimed at practicing engineers who wish to learn more about how to apply finite element techniques to their particular problems in the most effective manner. The material that is presented is independent of any particular software package, making it ideally suited to current and potential users of all commercial finite element software systems. This course is a must for all engineers aiming to use FEA as a reliable predictive tool for thermal,stiffness and stress analysis.
Companies moving into FEA technology to improve product designs or assess prototype failures or speed the design process will benefit from sending key engineers to this course. If you have sufficient engineers then a tailor made course maybe more suitable and NAFEMS can then work closely with you to cater for your specific industry sector or analysis type.
The course is open to both members and non-members of NAFEMS.
“The practical advice given by the lecturer about FEA was very useful”
Registration will be held on Tuesday morning between 9:00am and 9:30am, with the course starting immediately afterwards. The tutor will aim to commence the course at 9am on Wednesday and Thursday and finish by 5pm each evening. Each day there will be short morning, lunchtime and afternoon breaks, timing dependent on the tutor, venue and class.
This course program contains 5 parts that combine lectures, discussions, workshops and exercises.
Just off the M40, the beautiful Warwickshire countryside is on the doorstep, although with famous theatres, Shakespeare's houses and the River Avon all within walking distance, you'll want to arrange your return visit before you've even left. The hotel is only 28 miles from Birmingham International Airport.
We have secured a limited number of rooms at the venue hotel, at a special rate of£99, including VAT on a bed & breakfast basis. Please contact the hote ldirectly, advising reservations that you are attending a NAFEMS course, to book rooms at the discounted rate. This reduced rate is applicable to NAFEMS delegates until four weeks prior to course date.
Gino Duffett has over 30 years of experience in CAE software creation, training and industrial implementation and usage on an international level in various sectors, mostly automotive and renewable energy. Currently a Technical CAE Manager focussing on simulation driven design and automatic optimization.
Over his career Gino has taught numerical modelling up to university level, developed commercial courses and provided training for software users and Masters programmes on aspects such as metal forming, simulation process methodologies and optimization and has provided courses at Business schools on ERP and multi-cultural management.
Please note NAFEMS cancellation policy for all UK public training courses is as follows:-
NAFEMS will discuss the possibility of transferring to an alternative event/course, however an administration charge will be applicable.
For full terms and conditions, click here. This policy is subject to change.