Webex-Kurs:Verification and Validation in Engineering Simulation

Verification and Validation
in Engineering Simulation

26 - 28 May 2020, Webex (Online) - 2,5 days

Under the current circumstances, we offer the "V&V" classroom master course now as a Webex (online) training.

After registration, participants will receive a registration confirmation and login information. Once logged in, you will see the course slides on the monitor and listen to the presenter via your headset. The audio functions are retained so that you can also ask questions directly. However, we ask you to check that your microphone can be muted so that there is no disturbing background noise.


Course invitation

Engineering simulation plays an increasing role in industry’s search for competitiveness and technology based innovation at any stage of the design, qualification and certification of their products. Key decisions and product qualification/certification increasingly rely on virtual tests and digital simulations, creating a major paradigm shift in which the objective of physical tests is progressively moving from a demonstration of compliance to a reference for analysis validation. This trend in industry is shown through adoption of new terms such as “realistic simulation” and “virtual testing”. This situation creates new responsibility for the engineer to guarantee the required confidence level.

This new approach requires secured processes for the verification and validation (V&V) of simulations bringing evidence of their predictive capability. In particular, programme managers now require formal evidence on “simulation fit for purpose” on which they can build confidence and take decisions. In addition, the increasing situation for extended enterprise creates new constraints to guarantee safe and robust analysis processes.

At the same time, and due to the economic pressure, V&V activities are frequently seen as an additional cost that can easily be reduced and even fully cut, thus underestimating the induced risks. In addition, V&V is not easy to implement because of the diversity of involved persons: managers, simulation experts, test specialists, software developers and quality controllers, software vendors…

Course objectives and benefits

This Master Class is especially dedicated to V&V methodologies for numerical simulation in Engineering. Participants will:

  • Understand essential links between the product validation/certification and simulation V&V.
  • Learn how to plan and prioritize simulation V&V including physical tests programmes.
  • Understand validation test issues and improve synergy between virtual and physical tests in the context of validation.
  • Learn how to build business cases allowing for justification of V&V plans.
  • Understand simulation V&V organisation and management issues and best practises
  • Learn how to implement reporting to bring visibility and confidence to all managers concerned with simulation outcomes.
  • Be able to adapt or tailor the course methodologies to their specific industrial context, and further improve their V&V processes and plans.

Who should attend?

  • Primarily experienced engineers and senior analysts in charge of simulation activities or preparing to take new responsibility in the management of simulation, especially with regard to V&V responsibility
  • Managers in charge of engineering simulation teams and willing to improve their knowledge in V&V and in the relevant processes
  • Programme/project managers who need to make critical decisions based on engineering simulation results and wish to increase their understanding and visibility of the required V&V activities

Participants should have a few years of experience in engineering simulation for the design and development of industrial products.

Course context

All industry sectors confronted with numerical simulation V&V are concerned with this course. It is established on the solid knowledge of the tutors and the vision they have developed from their rich industrial experience, mainly within the aerospace and nuclear energy sectors and is primarily illustrated by FEA/Structure Analysis examples. The course is therefore of greatest interest to engineers involved in this technical domain, but will also appeal to engineers from other simulation domains because most of the V&V methodologies which are presented are generic in nature.

The course is neutral and independent of any particular software solution.

We limit the number of participants to a small group to facilitate dialog and exchanges between participants.


2 day Master Class Program

1. Introduction


  • Industrial context and stakes
  • Fundamentals of engineering simulation
  • Credibility for decision making


2. Verification & Validation of industrial products


  • V&V concepts for industrial products
  • V&V in Systems Engineering, hierarchical validation
  • Innovation in product development and TRL
  • Regulations and certification in aeronautics


3. Simulation management with focus on credibility


  • Simulation management with focus on capability management
  • Key management processes for credibility
    − Management of simulation processes and data (SPDM)
    − Competence management


4. Simulation V&V foundations & standards


  • Basic concepts
    − Verification
    − Validation and uncertainty quantification
    − Predictive capability
    − V&V processes
  • Guides and standards
    − History of standardization in V&V
    − Main standards: ASME, AIAA, NASA, NAFEMS…


5. Code verification


  • Error typology
  • Verification of algorithms
  • Quality assurance for software: methodologies for SW development, regression tests, exact and manufactured solutions…


6. Verification of analyses


  • A priori verifications: formal aspects, check-lists.
  • A posteriori verifications: space and time discretization errors, improvement of results.
  • Example of verification check-list


7. Validation and simulation/test synergy


  • Validation process and hierarchical planning
  • Validation tests, simulation/testing collaboration
    − Specificities and difficulties of validation tests
    − Prerequisites for successful validation tests
    − Test uncertainties
  • Accuracy assessment: deterministic and statistical validation metrics…
  • Predictive capability: main attributes and how to assess it?
  • Industrial examples


8. Trends in realistic simulation


  • HPC infrastructure trends: new architectures.
  • New discretization techniques
  • Solver improvements, multi-physics, multi-scale, optimization…
  • Realistic visualization: issues and benefits
  • Impact on V&V plans


9. Simulation Uncertainty Quantification (UQ)


  • Typology: random, epistemic uncertainties
  • Maturity of existing uncertainty quantification methodologies: Monte Carlo, Latin hypercube, response surfaces, polynomial chaos, “Lack of knowledge” theory, theory of evidence…
  • Sensitivity analysis, robustness (key parameters identification…)
  • Academic and industrial examples, methodologies and tools
  • UQ best practises


10. V&V implementation strategies
  • Responsibilities of V&V processes and actors
  • Implementation issues and obstacles
  • Simulation, V&V and industrial risks
  • Industrial justification: V&V business case, benefits versus costs
  • Best practises: planning and prioritization, maturity assessment and reporting to decision makers, organization.


11. Course outcomes and conclusion







Event Type: Training Course

Member Price: reduced €1250

Non-Member Price: reduced €1550


Start Date

End Date


26 May 2020 28 May 2020 Webex (Online)



Verification and Validation in Engineering Simulation



Jean-François IMBERT


Philippe PASQUET




Day 1 & 2 from 9am - 5pm
day 3 from 9am-12am



Course Fee
Non NAFEMS members: 1.550 Euro / person*
NAFEMS member: 1.250 Euro / person*
Proceedings and certificate included.
* plus VAT if applicable.

In-house Course
This course can be booked as in-house course. Please request a quote.

Cancellation Policy
Up to 6 weeks before course starts:
free of charge;
up to one week before: 75 %;
later and no show: 100 %.

Cancellation of a seminar
If not enough participants we keep the right to cancel the course one week before. The course can be canceled also in case of disease of the speakers or force majeure. In these cases the course fees will be returned.

Organisation / Contact
Deutschland, Österreich, Schweiz GmbH
Griesstraße 20
85567 Grafing b. München, Germany
Tel. +49 176 217 984 01
Fax +49 3 22 11 08 99 13 41
e-mail: info@nafems.de

Accreditation Policy

The course is agreed and under control of NAFEMS Education and Training Working Group (ETWG).