Creep
2D single element tests subject to secondary creep (Norton law):
- plane stress with constant uniaxial load
- plane stress with constant applied uniaxial displacement
- plane stress with constant biaxial load (3 different ratios)
- plane stress with constant applied biaxial displacement (3
different ratios)
- plane strain with constant unequi-biaxial load
- plane strain with constant applied unequi-biaxial displacement
3D single element tests subject to secondary creep (Norton law):
- with constant unequi-triaxial load
- with constant applied unequi-triaxial displacement
axisymmetric multi-element test subject to secondary creep (Norton
law):
- internally pressurised thick hollow cylinder
2D single element tests subject to primary creep (Norton-Bailey
law):
- plane stress with constant uniaxial load
- plane stress with constant uniaxial stepped load
- plane stress with constant applied uniaxial displacement
- plane stress with constant biaxial load (2 different ratios)
- plane stress with constant biaxial stepped load (2 different
ratios)
- plane stress with constant applied biaxial displacement (2
different ratios)
3D single element test subject to primary creep (Norton-Bailey
law):
- with constant unequi-triaxial load
2D single element tests subject to combined primary and secondary
creep:
- plane stress with constant uniaxial load
- plane stress with constant uniaxial stepped load
- plane stress with constant applied uniaxial displacement
Available From:
R0027
R0049 (subset of above)
R0080 (subset of above)
3D multi-element test subject to secondary Norton creep:
- torsional creep of long prismatic circular shaft under uniform
twist held constant with time
- torsional creep of long prismatic circular shaft under uniform
twist steadily increasing with time
3D multi-element test subject to primary creep (Norton-Bailey law)
with time hardening:
- torsional creep of a square shaft under constant twist
- torsional creep of a square shaft under steady twist rate
2D plane strain thick cylinder under temperature transient followed
by fluctuating internal pressure:
- both elastic-plastic and creep behaviour over 4 stages;
non-proportional loading
Axisymmetric multi-element test subject to temperature-dependent
secondary creep (Norton law):
- thick hollow cylinder with temperature gradients and thermally
dependent creep laws
Available From:
R0026
R0030
R0049 (subset of above)
R0080 (subset of above)
|
