Understand, implement, and get the most out of explicit dynamic simulation methods.
Specialised design problems involving short-duration high-pressure loadings generally require the use of explicit dynamics methods to obtain a good answer within reasonable time scales. These problems generally simulate severe loading and material failure, from events such as impact, blast loading, car crash, etc. Some manufacturing simulations in which there is changing contact between components with the material undergoing vast deformation also use explicit dynamics methods, such as metal forging, sheet metal pressing, etc.
Proving the necessary inputs and checking the results is important but often the real source of errors encountered in the simulation is difficult to determine.
This course provides a basic overview of explicit dynamics simulation methods, briefly describing the theoretical nature together with its software implementation and its advantages and disadvantages. It should help engineers carry out explicit dynamics simulations, ensuring accurate and robust solutions with correct analysis choices avoiding possible pitfalls. It should also help engineers distinguish problems that should be solved explicitly or implicitly, thereby providing the least time to obtain a solution.
Attending will explain the solution steps to carry out an explicit dynamic analysis, some of these being different to standard analyses such as controlling the hourglass modes,assigning damping and optimizing the computer time. Issues related to contact definition and avoiding extreme mesh deformation are also described.
Interaction is encouraged throughout the course. Questions and class participation are encouraged, as this is one of the key aspects of making this a unique and positive experience for each attendee.
Travel and training budgets are always tight! The e-Learning course has been developed to help you meet your training needs.
If your company has a group of engineers, or specific training requirements across any subjects, please contact us to discuss options.
This course combines information, examples, case studies and time for open discussion of the concepts presented.
|DVkn1||State Newton's 2nd Law or, equivalently, the d'Alembert Force Method.|
|DVco25||Discuss the characteristics of mass and damping matrices.|
|DVco30||Discuss the concept of mass and stiffness proportional (Rayleigh) damping.|
|DVco37||Describe the terms Lumped mass matrix and Consistent mass matrix and identify which formulation is appropriate to elements being used.|
|DVco44||Explain the terms Implicit Solution and Explicit Solution for the time integration of the equations of motion and the appropriate associated problem classes of dynamic analyses.|
|DVco47||Contrast mesh density requirements in static and dynamic problems.|
|DVco49||Discuss possible sources of nonlinearity in a dynamic problem.|
|DVco52||Explain why uniform meshes are often advised for shock or wave propagation problems.|
|DVap3||Employ a range of post-solution checks to determine the integrity of dynamic FEA results.|
|DVap7||Employ an analysis system for the determination of transient response in a range of linear and nonlinear systems.|
|DVap10||Employ an analysis system for the simulation of impact.|
|DVap11||Employ an analysis system for the determination of dynamic stresses, where appropriate.|
|DVap13||Illustrate the approximate nature of finite element analysis, through dynamic examples chosen from your industry sector.|
|DVan1||Analyse the results from dynamic analyses and determine whether they are consistent with assumptions made and the objectives of the analysis.|
|DVsy1||Prepare a dynamic analysis specification, highlighting any assumptions relating to geometry, mass distribution, loads, boundary conditions, damping, and material properties.|
|DVsy2||Plan a dynamic analysis, specifying necessary resources and timescale.|
|DVsy3||Prepare quality assurance procedures for dynamic finite element analysis activities within an organisation.|
|DVev1||Select appropriate idealisation(s) for components / structures, which are consistent with the objectives of the dynamic analyses.|
|DVev2||Assess the significance of neglecting any feature or detail in any dynamic idealisation.|
|DVev3||Assess the significance of simplifying geometry, material models, mass, loads or boundary conditions and damping assumptions on a dynamic analysis.|
|Member Price||£181.25 | $225.00 | €200.63|
|Non-member Price||£273.88 | $340.00 | €303.17|
|Start Date||End Date||Location|
| ||Online|| |
NOT AVAILABLE TO ATTEND THIS TIME?
WOULD YOU LIKE US TO NOTIFY YOU WHEN THE NEXT COURSE IS OPEN FOR ENROLLMENT? IF SO, ADD YOURSELF TO THE ELEARNING WAITLIST
*IT IS YOUR INDIVIDUAL RESPONSIBILITY TO CHECK WHETHER THESE E-LEARNING COURSES SATISFY THE CRITERIA SET-OUT BY YOUR STATE ENGINEERING BOARD. NAFEMS DOES NOT GUARANTEE THAT YOUR INDIVIDUAL BOARD WILL ACCEPT THESE COURSES FOR PDH CREDIT, BUT WE BELIEVE THAT THE COURSES COMPLY WITH REGULATIONS IN MOST US STATES (EXCEPT FLORIDA, NORTH CAROLINA, LOUISIANA, AND NEW YORK, WHERE PROVIDORS ARE REQUIRED TO BE PRE-APPROVED)
TELEPHONY SURCHARGES MAY APPLY FOR ATTENDEES WHO ARE LOCATED OUTSIDE OF NORTH AMERICA, SOUTH AMERICA AND EUROPE. THESE SURCHARGES ARE RELATED TO INDIVIDUALS WHO JOIN THE AUDIO PORTION OF THE WEB-MEETING BY CALLING IN TO THE PROVIDED TOLL/TOLL-FREE TELECONFERENCING LINES. WE HAVE MADE A VOIP OPTION AVAILABLE SO ANYONE ATTENDING THE CLASS CAN JOIN USING A HEADSET (HEADPHONES) CONNECTED TO THE COMPUTER. THERE IS NO ASSOCIATED SURCHARGE TO UTILIZE THE VOIP OPTION, AND IS ACTUALLY ENCOURAGED TO ENSURE NAFEMS IS ABLE TO KEEP THE E-LEARNING COURSE FEES AS LOW AS POSSIBLE. PLEASE SEND AN EMAIL TO THE E-LEARNING COORDINATOR (E-LEARNING @ NAFEMS.ORG ) TO DETERMINE IF THESE SURCHARGES MAY APPLY TO YOUR SPECIFIC CASE.
JUST AS WITH A LIVE FACE-TO-FACE TRAINING COURSE, EACH REGISTRATION ONLY COVERS ONE PERSON. IF YOU PLAN TO REGISTER A LARGE GROUP (10+), PLEASE SEND AN EMAIL TO E-LEARNING @ NAFEMS.ORG IN ADVANCE FOR GROUP DISCOUNTS.
FOR NAFEMS CANCELLATION AND TRANSFER POLICY, CLICK HERE.