CFD – Flow Simulation in Engineering


CFD-Flow Simulation in Engineering

22 February 2018

E.T.S. de Ingeniería Aeronáutica y del Espacio, Universidad Politécnica de Madrid (UPM)


Complex flows are commonplace in engineering systems and the temptation to model flow regimes in their most general three-dimensional (3D) and time-variant detail seems difficult to resist. However there may be quicker, more cost-effective ways using 1D or 2D simulations, for example, to meet project objectives, and, if this is possible, the project workflow would certainly benefit from early results and reduced analysis costs. With the appropriate decisions and simulation tools, analysis quality and accuracy may even be further enhanced.

Presentations focus on industrial case studies showing what using CFD brings to a project that cannot be achieved using other methods. For example, CFD can really help in understanding flow behaviour since testing flow systems and taking measurements from them (without affecting the flow) is problematic.

Flow simulations are used in almost all sectors with many different applications and methodologies so different sectors and applications have been encouraged in order to create awareness and enhance our inter-sector discussion, collaboration and learning.

The best presentation, as voted by the NAFEMS-Iberia committee, will be offered to be published in the NAFEMS Benchmark magazine.

Agenda


14:00Registration & Coffee 
14:30Welcome by NAFEMS-Iberia
14:35Presentation by NAFEMS
14:45Luis Pérez HerasNABLADOT 
 A chamber and ten thousand pipes: the challenge of simulating combustion and heat recovery in power plants
15:15M. D’AlessioAltair 
 Pedestrian comfort analysis: May it be a concept design tool?
15:35Antonio AlmenaraMSC 
 Dynamic stiffness estimation of an engine support hydrobushing
15:55Questions & Answers
16:05Coffee & Snacks  
 TRACK 1TRACK 2
16:45Luis Lacoma & Javier RodríguezLuis Diaz
 PrincipiaIkerlan
 Pressure fluctuations in railway tunnelsDevelopment of more efficient and less polluting combustion systems assisted by CFD tools
17:05Alberto López de Arriba EscribanoArmindo Guerrero
 TPF IngenieriaITMA
 Tunnel ventilation design: 1D or 3D simulation?Fire tube boiler optimization: Combustion process simulation by means of CFD
17:25Roberto Suárez Sierra & Andrea Morilla GonzálezJ. Penalva
 AST IngenieríaCIEMAT
 Simulation and optimization of the airflow extraction system in underground stationsAplicaciones de CFDs a estudios de seguridad de contenedores de almacenamiento en seco de combustible nuclear irradiado
17:45Questions & Answers
17:55Access to presentation rooms
18:05José VoitRémi Lestriez
 SIEMENSNUMIBERICA
 Aircraft bleed air system optimizationCFD as design tools in renewable energy engineering
18:25Félix ArévaloJuan Carlos Cajas García
 AirbusBSC
 A practical approach for using complex fluid-structure schemes in the aircraft aeroelastic certification analysesAlya: A HPC multi-physics software for industrial applications
18:45Questions & Answers
18:55Close



Product Details

Order Ref: CFD-FLOW
Location: Madrid
Country: Spain

Member Price
Free


Order Ref: CFD-FLOW
Location: Madrid
Country: Spain

Member Price
Free


Order Ref: Iberia CFD 2018
Location: Madrid
Country: Spain
Type: Seminar

Member Price
Free