Standards A - E

The NAFEMS Standards Initiative A - E

GroupingStandardMaturity LevelPrimary PurposeApplication DomainApplicable Industry
AES (Audio Engineering Society)
AES-5id-1997 (s2019): AES information document for acoustics - Loudspeaker modeling and measurement - Frequency and angular resolution for measuring, presenting, and predicting loudspeaker polar data | Website
ImplementedSimulation Quality ManagementRay Tracing AcousticsAll
AIAA
AIAA G-077-1998 (2002): Guide for the Verification and Validation of Computational Fluid Dynamics Simulations | Website
ImplementedSimulation Quality ManagementCFD V&VAll
AIAA
AIAA R-101A-2005 - Recommended Practice: The CFD General Notation System – Standard Interface Data Structures | Document
ImplementedSimulation in Support of DesignCFD Data ExchangeAll
AISC (American Institute of Steel Construction)
ANSI/AISC 360-16; July 7, 2016: Specification for Structural Steel Buildings | Document | Website
ImplementedSimulation in Support of DesignStructural IntegrityStructures
ANSI
Quality Information Framework (QIF) Standard; 2019: QIF 3.0 | Document | Website
ImplementedData ManagementData ExchangeAll
API/ASME (American Petroleum Institute/American Society of Mechanical Engineers)
API 579-1/ASME FFS-1; June, 2016: Fitness-For-Service Assessment | Website | Link
ImplementedSimulation in Support of DesignStructural IntegrityOil & Gas Pressure Industries
ASME
ASME V&V 10; 2006: Guide for Verification and Validation in Computational Solid Mechanics | Website
ImplementedSimulation Quality ManagementV&V Structural IntegrityAll
ASME
ASME V&V 20; 2009: Standard for Verification and Validation in Computational Fluid Mechanics and Heat Transfer | Website
ImplementedSimulation Quality ManagementV&V CFD Heat TransferAll
ASME
ASME V&V 30: V&V in Computational Simulation of Nuclear System Thermal Fluids Behavior | Website
In DevelopmentSimulation Quality ManagementV&V CFD Heat TransferNuclear
ASME
ASME V&V 40; 2018: Assessing Credibility of Computational Modeling through Verification and Validation: Application to Medical Devices | Website
ImplementedSimulation Quality ManagementV&VBiomedical
ASME
ASME V&V 50: Verification and Validation of Computational Modeling for Advanced Manufacturing | Link
In DevelopmentSimulation Quality ManagementV&VManufacturing
ASME
ASME V&V 60: Verification and Validation of Computational Modeling in Energy Systems | Link
In DevelopmentSimulation Quality ManagementV&VAll
ASME
BPVC Section VIII-Rules for Construction of Pressure Vessels Division 2-Alternative Rules | Website | Link
ImplementedSimulation in Support of DesignStructural IntegrityNuclear Pressure Industries
ASME
V&V 40.1, V&V 40.2, V&V 40.3, V&V 40.4 & V&V 40.5 | Website
In DevelopmentSimulation Quality ManagementV&VBiomedical
ASME
V&V 10.1 -2012 An Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics | Website
ImplementedSimulation Quality ManagementV&V Structural IntegrityAll
ASTM
ASTM F2514-08; 2014: Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading | Website
ImplementedSimulation Quality ManagementStructural IntegrityBiomedical
ASTM
ASTM F2996-13; 2013: Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems | Website
ImplementedSimulation Quality ManagementStructural IntegrityBiomedical
ASTM
ASTM F3161-16; 2016: Standard Test Method for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Femoral Components under Closing Conditions | Website
ImplementedSimulation Quality ManagementStructural IntegrityBiomedical
ASTM
ASTM E2232 - 10; 2017: Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications | Website
ImplementedSimulation Quality ManagementRadiationBiomedical Nuclear
ASTM
ASTM E2443-05; 2018, e1: Standard Guide For Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets | Website
ImplementedSimulation Quality ManagementMaterial Characterisation V&VAll
ASTM
ASTM E2898 - 14: Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications | Website
ImplementedSimulation Quality ManagementV&VBiomedical
AWS (American Welding Society)
AWS A9.5; 2013: Guide for Verification and Validation in Computation Weld Mechanics | Website
ImplementedSimulation Quality ManagementStructural Integrity CFD Heat Transfer Residual Stress V&VManufacturing
BSI (British Standards Institution)
BS 7910:2013+A1; 2015: Guide to methods for assessing the acceptability of flaws in metallic structures | Website
ImplementedSimulation in Support of DesignFracture & Fatigue Structural IntegrityPower Pressure Systems Oil and Gas
CEN
BS EN 14531-1:2015+A1:2018 - Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking. General algorithms utilizing mean value calculation for train sets or single vehicles | Website
ImplementedSimulation in Support of DesignDynamicsRail
CEN/TC 256
EN 12663 Railway applications - Structural requirements of railway vehicle bodies | Website
ImplementedSimulation in Support of DesignStructural AnalysisRail
CFR (Code of Federal Regulations)
Title 14 (Aeronautics and Space)-Structural Analysis | Website | Link
ImplementedSimulation Quality ManagementCertificationAerospace
CFR (Code of Federal Regulations)
Title 49 (Transportation)-CFR Part 571; Federal Motor Vehicle Safety Standards (FMVSS) 207/210: Automotive occupant safety and assessing the strength of driver seat failure components | Website
ImplementedSimulation in Support of DesignCertificationAutomotive
CFR (Code of Federal Regulations)
Title 14 (Aeronautics and Space)-Engineering Analysis for Aircraft Type Certification | Website | Link Link Link
ImplementedSimulation Quality ManagementCertificationAerospace
CIBSE (The Chartered Institution of Building Services Engineers)
AM11 Building Performance Modelling; 2015 | Website
ImplementedSimulation GuidanceCFDAll
DNV
DNVGL-RP-C208 Determination of structural capacity by non-linear finite element analysis methods | Document
ReleasedSimulation Quality ManagementStructural IntegrityDefence Marine Oil & Gas
DNV (Det Norske Veritas)
DNV-DS-J102 Standard: Design and Manufacture of Wind Turbine Blades, Offshore and Onshore Wind Turbines | Document
ImplementedSimulation in Support of DesignV&VWind
DNV (Det Norske Veritas)
DNVGL-RP-C203; 2016: Fatigue design of offshore steel structures | Document
ImplementedSimulation in Support of DesignFatigue Structural IntegrityOffshore Oil & Gas Wind
DNV (Det Norske Veritas)
DNVGL-ST-F201; 2018: Dynamic risers | Document
ImplementedSimulation in Support of DesignStructural Integrity DynamicsOffshore Oil & Gas
DNV (Det Norske Veritas)
DNVGL-CG-0127; October, 2015: Finite Element Analysis | Document
ImplementedSimulation Quality ManagementStructural IntegrityMarine
DNV (Det Norske Veritas)
DNVGL-CG-0130; January, 2018: Wave loads | Document
ImplementedSimulation Quality ManagementLoadingMarine
DNV (Det Norske Veritas)
DNVGL-CG-0131; January, 2018: Strength analysis of hull structure in container ships | Document | Link
ImplementedSimulation Quality ManagementStructural IntegrityMarine
DNV (Det Norske Veritas)
DNVGL-CG-0151; July, 2017: Strength analysis of general cargo and multi-purpose dry cargo ships | Document
ImplementedSimulation Quality ManagementStructural IntegrityMarine
DNV (Det Norske Veritas)
DNVGL-CG-0153; October, 2015: Fatigue and ultimate strength assessment of container ships including whipping and springing | Document
ImplementedSimulation in Support of DesignFatigue Structural IntegrityMarine
DNV (Det Norske Veritas)
DNVGL-ST-0126; July, 2018: Support structures for wind turbines | Document
ImplementedSimulation in Support of DesignStructural IntegrityWind
DNV (Det Norske Veritas)
DNVGL-ST-C501; August, 2017: Composite components | Document | Link
ImplementedSimulation in Support of DesignComposite Structural IntegrityOffshore Process Industry
DoD (Department of Defense)
DoD MIL-STD-3022; 2012: Documentation of Verification, Validation, and Accreditation for Models and Simulations | Website | Link
ImplementedSimulation Quality ManagementV&VDefence
Eclipse Foundation
Eclipse APP4MC; Feb 2019: Platform for engineering embedded multi- and many-core software systems [AMALTHEA Platform was transferred to Eclipse APP4MC] | Website
ImplementedData ManagementInteroperabilityAll
EN European Standards (European Norms)
EN 12810-2; 2004: Facade scaffolds made of prefabricated components - Particular methods of structural design | Website | Link
ImplementedSimulation in Support of DesignStructural IntegrityStructures
EN European Standards (European Norms)
EN 13445-3; 2014+A4; 2018: Unfired pressure vessels: Design | Website | Link
ImplementedSimulation in Support of DesignStructural IntegrityNuclear Oil & Gas Power Pressure Systems
EN European Standards (European Norms)
EN 1993-1-5: Eurocode 3 - Design of steel structures - Parts 1-5: Plated structural elements | Website
ImplementedSimulation in Support of DesignFatigue Structural IntegrityStructures
EN European Standards (European Norms)
CEN/TR 16303 Parts 1-4; 2012: Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system | Website
ImplementedSimulation Quality ManagementImpact, Shock & CrashAutomotive Transport
EN European Standards (European Norms)
EN 40-3-3; 2013: Lighting columns - Design and verification - Verification by calculation | Website
ImplementedSimulation in Support of DesignStructural IntegrityTransport
EN European Standards (European Norms)
EN 14363: 2016: Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests | Website
ImplementedSimulation Quality ManagementDynamicsRail
EN European Standards (European Norms)
EN 50318; 2018: Railway applications. Current collection systems. Validation of simulation of the dynamic interaction between pantograph and overhead contact line | Website
ImplementedSimulation Quality ManagementV&VRail
EN European Standards (European Norms)
EN 50641; 2014: Railway applications. Fixed installations. Requirements for the validation of simulation tools used for the design of traction power supply systems | Website
Implemented (withdrawn)Simulation Quality ManagementV&VRail
EN European Standards (European Norms)
EN 50641; DRAFT 2017: Railway applications. Fixed installations. Requirements for the validation of simulation tools used for the design of traction power supply systems | Website
In DevelopmentSimulation Quality ManagementV&VRail