Student Resources

3541. Sponsorship

      NAFEMS India Conference 2025 Sponsorship Opportunities Join us in Bengaluru We would like to extend an invitation to your company to be part of the NAFEMS India Conference 2025 – Engineering Solutions for Tomorrow's Challenges. There are several outstanding opportunities available for your company to sponsor the conference, giving you maximum exposure to a highly targeted audience of delegates, who are all directly involved in simulation, analysis, and design. Our conferences attract a large number of delegates, many of whom are in a position to influence or approve, the purchase of services, software, hardware, and consultancy solutions. P​lease note, all sponsorship and exhibition prices...more

3542. Managing Simulation Quality and Data at the UK Atomic Weapon Establishment

      This presentation was made at the 2019 NAFEMS World Congress in Quebec Canada Resource Abstract In a Comprehensive Nuclear-Test-Ban Treaty (CTBT) era, simulation has widespread use across Physics, Material Science and Engineering at the UK Atomic Weapons Establishment (AWE). The engineering analysis team covers a wide scope of simulation topics including FEA/FVA of solid mechanics, structural dynamics, hypersonic CFD, thermal and blast effects. This in turn creates a broad range of data from a variety of engineering software tools. With increasing emphasis on coupled Multiphysics techniques and parameter sensitivity studies, an enormous amount of data is generated and is increasingly more difficult...more

3543. Optimising your Design for Manufacturing

      Presentation made by B. Patel at the NAFEMS UK Regional Conference - Engineering Simulation: The Future Begins Today held in Telford, England on the 15th and 16th of June 2016....more

3544. How do you get ready for 2030? You've got to start now: How simulation is changing and what you need to do to keep up

      How do you get ready for 2030? You've got to start now: How simulation is changing and what you need to do to keep up 5-minute read Monica Schnitger - August 29th 2022 In the webinar ‘The Changing World of Simulation’ Monica Schnitger, founder, president, and principal analyst at Schnitger Corporation gives us the lay of the land in terms of where we are in the world of simulation and where it looks like we’re headed. The webinar is packed with insights and ideas from the industry expert. Delivered in her clear and concise style, it will give anyone interested in charting a way forward in the rapidly changing climate that simulation engineering finds itself in plenty to think about....more

3545. Techniques for modelling joints: A review of Static Design Approaches

      Structures are built-up from components connected by joints. For a structure with a vibration duty there are many uncertainties: - Can static joint design be used for dynamic design? - What is the dynamic stiffness of a joint? - How much damping is provided by a joint? - How do you model the dynamics of joints in simulation codes? - Can joints be designed to assist structural dynamic? - How repeatable and predictable is the behaviour of a joint? - Can joints be simplified to reduce weight and complexity? Research into these issues has received growing attention and some answers are now available. This workshop introduced the problems, the current knowledge, some approaches and some solutions....more

3546. Special Sessions

      NRC22 UK Special Sessions Short Courses Understanding Solid Mechanics - a pick-n-mix of basic courses Understanding Solid Mechanics is a set of 30 stand-alone courses addressing all aspects of solid mechanics that are important for designers and engineers who wish to gain a good understanding of the main theories underlying solid mechanics. This enables companies to select the courses that are suitable for them in order to customise their training. This short course will provide an overview of the concepts, methods of presentation and a summary of all the courses currently on offer. It will also be possible to discuss new ideas and personalization of the courses to suit your company’s needs....more

3547. The Functional Mockup Interface – FMI: Introduction and Use Cases

      The Functional Mockup Interface – FMI: Introduction and Use Cases Overview The Functional-Mockup-Interface has been a remarkable success story for a standard: developed in a European Research project with a first release in 2010 it has become the de-facto standard for exchanging system models between tools, and for co-simulations. FMI is by now supported by more than 140 tools and counting. In this webinar, we looked at how FMI works, what its main use cases are, and why engineers responsible for simulation workflows and model-based design should know about it. A Functional-Mockup-Unit is a model that conforms to the FMI Standard. We looked at co-simulation using FMUs, and what implications...more

3548. Reinvesting Cost Optimization Savings to Fuel Digital transformation

      NAFEMS Americas and Digital Engineering (DE) teamed up (once again) to present CAASE, the (now Virtual) Conference on Advancing Analysis & Simulation in Engineering, on June 16-18, 2020! CAASE20 brought together the leading visionaries, developers, and practitioners of CAE-related technologies in an open forum, unlike any other, to share experiences, discuss relevant trends, discover common themes, and explore future issues, including: -What is the future for engineering analysis and simulation? -Where will it lead us in the next decade? -How can designers and engineers realize its full potential? What are the business, technological, and human enablers that will take past successful developments...more

3549. Choosing Between Managed HPC Clusters and Cloud for CAE - Challenges and Opportunities

      NAFEMS Americas and Digital Engineering (DE) teamed up (once again) to present CAASE, the (now Virtual) Conference on Advancing Analysis & Simulation in Engineering, on June 16-18, 2020! CAASE20 brought together the leading visionaries, developers, and practitioners of CAE-related technologies in an open forum, unlike any other, to share experiences, discuss relevant trends, discover common themes, and explore future issues, including: -What is the future for engineering analysis and simulation? -Where will it lead us in the next decade? -How can designers and engineers realize its full potential? What are the business, technological, and human enablers that will take past successful developments...more

3550. Automating CAD to CAE Preprocessing for Parametric Optimization Iterations

      NAFEMS Americas and Digital Engineering (DE) teamed up (once again) to present CAASE, the (now Virtual) Conference on Advancing Analysis & Simulation in Engineering, on June 16-18, 2020! CAASE20 brought together the leading visionaries, developers, and practitioners of CAE-related technologies in an open forum, unlike any other, to share experiences, discuss relevant trends, discover common themes, and explore future issues, including: -What is the future for engineering analysis and simulation? -Where will it lead us in the next decade? -How can designers and engineers realize its full potential? What are the business, technological, and human enablers that will take past successful developments...more

Page 355 of 413Total results: 4125