Student Resources

1331. The Room Where it Happens

      The Room Where it Happens Nobody with an ounce of self-respect should encounter the use of ‘networking’ and ‘event’ in the same sentence without the temperature of their bloodstream dropping a few Kelvin. Too much explaining what you do, for a start. I actually thought I’d got explaining what I do for a living pretty much sorted, until a couple of days ago a good friend of many years standing announced on the way out of the pub that she still wasn’t really sure what it was that I did for a living. So, it’s against that background that I’m going to propose that it’s not what you know, it’s who you know that matters. But not in a jobs for the boys 21st century nepo baby kind of way. This article...more

1332. Talking Shop with Tony Abbey - Episode 15 - Random response dynamic analysis - so what is a PSD curve?

      Talking Shop with Tony Abbey Episode 15 - Random response dynamic analysis - so what is a PSD curve? Due to circumstances beyond our control, we have had to cancel this episode, and will let everyone know the rescheduled date when available. We sincerely apologise for any inconvenience. NAFEMS is talking shop with Tony Abbey on a range of topics relevant to, and suggested by, the engineering analysis community. This free series is open to everyone , and we hope you can join us online. We kicked off each session with a brief presentation on the subject from Tony, and thereafter, open up the floor for written questions and thoughts from you, the audience. The sessions was moderated, allowing...more

1333. Simulation Data Management – What About my Spreadsheets?

      Simulation Data Management – What About my Spreadsheets? An approach for capturing data from simulation and modeling spreadsheets Today, many manufacturers are facing tremendous challenges related to the storage and retrieval of simulation data. Product Data Management (PDM) systems are not capable of handling the terabytes of information which are generated as a result of performing these complex simulations. Simulation Data Management (SDM) provides a mechanism for the storage, management, and retrieval of this performance-related data. The Simulation Data Management working group addresses this breakthrough technology by helping the community better understand the benefits gained from implementing...more

1334. Simulation Data Management – What About my Spreadsheets?

      Click to watch to recording of this webinar Click to access the slides for this webinar Simulation Data Management – What About my Spreadsheets? An approach for capturing data from simulation and modeling spreadsheets Today, many manufacturers are facing tremendous challenges related to the storage and retrieval of simulation data. Product Data Management (PDM) systems are not capable of handling the terabytes of information which are generated as a result of performing these complex simulations. Simulation Data Management (SDM) provides a mechanism for the storage, management, and retrieval of this performance-related data. The Simulation Data Management working group addresses this breakthrough...more

1335. Simulation

      6. S​imulation Input Data The final major section of the course brings together all the formerly covered information to show how it can be applied to a forming simulation model; as well as material data, other information required to describe the tooling and process are explained as well as certain numerical parameters for the relevant solver. Solvers The different solver methods are presented, including one-step and both explicit and implicit incremental approaches, noting the pros and cons of each. Example Model The final stage is to pull everything together with a simple simulation model of the Forming Limit Test. Results The results of the FLC test model are then presented, starting...more

1336. Practical Implementation of Digital Twins for Today and Tomorrow

      NAFEMS Americas hosted its biennial regional conference, formerly known as CAASE, on June 21-23, 2022, face-to-face, at the Indiana Convention Center in Indianapolis, Indiana! The NAFEMS Americas Regional Conference 2022 (NRC22 Americas) brought together the leading visionaries, developers, and practitioners of CAE-related technologies in an open forum, unlike any other, sharing experiences, discussing relevant trends, discovering common themes, and exploring future issues, including: What is the future for engineering analysis and simulation? Where will it lead us in the next decade? How can designers and engineers realize its full potential? What are the business, technological,...more

1337. The Impact of MBE on Simulation: From Embedded Software to Digital Twins – Leveraging System Simulation Models across the Product Lifecycle

      This presentation was made at the NAFEMS Americas Seminar "Model-Based Engineering: What is it & How Will It Impact Engineering Simulation" held on the 1st of October 2019 in Columbus Ohio Resource Abstract Simulation is key in driving data-driven decision-making throughout the product design and development process, creating a virtual environment where engineers can optimize and make design trade-offs for cost and function. While simulation practices are well established in the design and development phase, physics-based models are rarely leveraged after a product is released. These physics-based simulation models provide insights into the operational conditions of the product, which cannot...more

1338. Generative Design Use Case Requirements Assessment

      NAFEMS Americas and Digital Engineering (DE) teamed up (once again) to present CAASE, the (now Virtual) Conference on Advancing Analysis & Simulation in Engineering, on June 16-18, 2020! CAASE20 brought together the leading visionaries, developers, and practitioners of CAE-related technologies in an open forum, unlike any other, to share experiences, discuss relevant trends, discover common themes, and explore future issues, including: -What is the future for engineering analysis and simulation? -Where will it lead us in the next decade? -How can designers and engineers realize its full potential? What are the business, technological, and human enablers that will take past successful developments...more

1339. Engineering Simulation Confidence & Credibility - What can NAFEMS/ASSESS do to improve confidence of simulation analysts and credibility for decision makers?

      This presentation has been held at the NAFEMS ASSESS Summit 2024 , on the 5th and 6th of March, 2024....more

1340. Most Effective ROI Models for Simulation Applications: Answers from Research

      NAFEMS Americas and Digital Engineering (DE) teamed up (once again) to present CAASE, the (now Virtual) Conference on Advancing Analysis & Simulation in Engineering, on June 16-18, 2020! CAASE20 brought together the leading visionaries, developers, and practitioners of CAE-related technologies in an open forum, unlike any other, to share experiences, discuss relevant trends, discover common themes, and explore future issues, including: -What is the future for engineering analysis and simulation? -Where will it lead us in the next decade? -How can designers and engineers realize its full potential? What are the business, technological, and human enablers that will take past successful developments...more

Page 134 of 392Total results: 3917