NAFEMS International Journal of CFD Case Studies

Volume 13, September 2023

ISSN 1462-236X
ISBN 978-1-83979-059-1

A Coupled Simulation Approach to 3D Battery Thermal Runaway Cell to Cell Propagation

Vishnuvardhan Ranganathan, Sacha Jelić
ThermoAnalytics GmbH, Germany

https://doi.org/10.59972/zvzlkymv

Abstract

In the event of significant structural or thermal abuse to a battery cell, elevated temperatures can trigger a runaway exothermic reaction that can propagate throughout the pack. During thermal runaway, the pressure relief mechanisms of the pack will result in venting (degassing) of hot, combustible gases. The potential for high temperatures and fire poses a significant danger to vehicle occupants and first responders. For this reason, regulations guaranteeing at least five minutes for occupant egress before a hazardous situation develops in the vehicle cabin have been implemented in China, with similar regulations anticipated globally. To meet these global safety standards, OEMs must investigate the integration of runaway propagation prevention and damage mitigation methods within the battery pack and vehicle designs. This paper presents a transient simulation workflow that is capable of simulating thermal runaway propagation of multiple cells inside the battery pack for a duration of 30 minutes and the effect on the external vehicle system components due to the degassing. The method is a coupled approach between a 3D CFD solver that simulates the convection and a 3D thermal simulation software that handles the conduction and radiation. By coupling and decoupling the convection from CFD and the conduction/radiation solver, long transient scenarios can be simulated with quick turn-around times without compromising on accuracy. The simulation includes a predictive method for determining when the next battery cell goes into thermal runaway, which will then automatically cause the cell temperature increase and its venting. It will be demonstrated how this workflow can be applied to vehicle thermal analysis and heat protection studies, how to slow down the propagation of thermal runaway or even completely prohibit it by applying thermal insulation materials between the cells. Surrounding components can be protected by applying shielding, to avoid these components to melt or catch fire. The cabin compartment floor and carpet temperatures can be predicted, and insulation materials can be applied to avoid the temperatures inside the cabin to get too high or to catch fire, potentially endangering vehicle occupants.

References

1. B. Mao, H. Chen, Z. Cui, T. Wu, and Q. Wang, “Failure mechanism of the lithium ion battery during nail penetration,” International Journal of Heat and Mass Transfer, vol. 122, pp. 1103–1115, Jul. 2018, doi: https://doi.org/10.1016/j.ijheatmasstransfer.2018.02.036.
2. X. Feng, M. Ouyang, X. Liu, L. Lu, Y. Xia, and X. He, “Thermal runaway mechanism of lithium ion battery for electric vehicles: A review,” Energy Storage Materials, vol. 10, pp. 246–267, Jan. 2018, doi: https://doi.org/10.1016/j.ensm.2017.05.013.
3. D. Ren et al., “Model-based thermal runaway prediction of lithium-ion batteries from kinetics analysis of cell components,” Applied Energy, vol. 228, pp. 633–644, Oct. 2018, doi: https://doi.org/10.1016/j.apenergy.2018.06.126.
4. M. N. Richard and J. R. Dahn, “Accelerating Rate Calorimetry Study on the Thermal Stability of Lithium Intercalated Graphite in Electrolyte. II. Modeling the Results and Predicting Differential Scanning Calorimeter Curves,” Journal of The Electrochemical Society, vol. 146, no. 6, pp. 2078–2084, Jun. 1999, doi: https://doi.org/10.1149/1.1391894.
5. S. Gao et al., “Experimental Study on Module-to-Module Thermal Runaway-Propagation in a Battery Pack,” Journal of The Electrochemical Society, vol. 166, no. 10, pp. A2065–A2073, Jan. 2019, doi: https://doi.org/10.1149/2.1011910jes.
6. S.-M. Bak et al., “Structural Changes and Thermal Stability of Charged LiNixMnyCozO2 Cathode Materials Studied by Combined In Situ Time-Resolved XRD and Mass Spectroscopy,” ACS Applied Materials & Interfaces, vol. 6, no. 24, pp. 22594–22601, Dec. 2014, doi: https://doi.org/10.1021/am506712c.
7. P. Huang et al., “Experimental and modeling analysis of thermal runaway propagation over the large format energy storage battery module with Li4Ti5O12 anode,” Applied Energy, vol. 183, pp. 659–673, Dec. 2016, doi: https://doi.org/10.1016/j.apenergy.2016.08.160.
8. J. Kleiner, L. Komsiyska, G. Elger, and C. Endisch, “Thermal Modelling of a Prismatic Lithium-Ion Cell in a Battery Electric Vehicle Environment: Influences of the Experimental Validation Setup,” Energies, vol. 13, no. 1, p. 62, Dec. 2019, doi: https://doi.org/10.3390/en13010062.
9. R. Zhao, Z. Lai, W. Li, M. Ye, and S. Yu, “Development of a coupled model of heat generation and jet flow of lithium-ion batteries during thermal runaway,” Journal of Energy Storage, vol. 63, p. 107048, Mar. 2023, doi: https://doi.org/10.1016/j.est.2023.107048.
10. G.-H. Kim, A. Pesaran, and R. Spotnitz, “A three-dimensional thermal abuse model for lithium-ion cells,” Journal of Power Sources, vol. 170, no. 2, pp. 476–489, Jul. 2007, doi: https://doi.org/10.1016/j.jpowsour.2007.04.018.
11. F. M. White, Fluid Mechanics, SI units, 2015.
12. J. Crank and N. Phyllis, “A practical method for numerical evaluation of solutions of partial differential equations of the heat-conduction type,” in Mathematical Proceedings of the Cambridge Philosophical Society, vol. 43, no. 1, pp. 50–67, Cambridge University Press, 1947.
13. C. H. Lee, S. J. Bae, and M. Jang, “A study on effect of lithium ion battery design variables upon features of thermal-runaway using mathematical model and simulation,” Journal of Power Sources, vol. 293, pp. 498–510, Oct. 2015, doi: https://doi.org/10.1016/j.jpowsour.2015.05.095.
14. C. Xu et al., “Internal temperature detection of thermal runaway in lithium-ion cells tested by extended-volume accelerating rate calorimetry,” Journal of Energy Storage, vol. 31, p. 101670, Oct. 2020, doi: https://doi.org/10.1016/j.est.2020.101670.
15. P. Ping, Q. Wang, P. Huang, J. Sun, and C. Chen, “Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method,” Applied Energy, vol. 129, pp. 261–273, Sep. 2014, doi: https://doi.org/10.1016/j.apenergy.2014.04.092.
16. Devadatta Mukutmoni, S. Jelic, J. Han, and M. Haffey, “Role of Accurate Numerical Simulation of Brake Cooldown in Brake Design Process,” SAE International Journal of Passenger Cars - Mechanical Systems, vol. 5, no. 4, pp. 1199–1210, Sep. 2012, doi: https://doi.org/10.4271/2012-01-1811.
17. W. Hunt, A. Price, S. Jelic, V. Staelens, and M. S. Ul-Hasnain, “A Coupled Simulation Approach to Race Track Brake Cooling for a GT3 Race Car,” Progress in Vehicle Aerodynamics and Thermal Management, pp. 3–17, Dec. 2017, doi: https://doi.org/10.1007/978-3-319-67822-1_1.
18. S. Ahmed, “Modular methodology for transient vehicle thermal management simulations,” PhD diss., 2021.

Cite this paper

Ranganathan, V., Jelić, S. A Coupled Simulation Approach to 3D Battery Thermal Runaway Cell to Cell Propagation, NAFEMS International Journal of CFD Case Studies, Volume 13, September 2023, https://doi.org/10.59972/zvzlkymv