This Website is not fully compatible with Internet Explorer.
For a more complete and secure browsing experience please consider using Microsoft Edge, Firefox, or Chrome




  • Multiscale progressive failure analysis
  • Static,fatigue, impact, PSD and  thermal loading
  • Manufacturing defects


  • Material characterisation and qualification
  • UD, 2D/3D woven, braided, sandwich composites
  • PMC/CMC/MMC/Hybrid systems
  • Design failure envelope and allowables


  • Material characterisation
  • Chopped fibre reinforced composites
  • Design failure envelope and allowables

Add-on tools for FEA packages:Abaqus, ANSYS, LS-DYNA, Nastran, OptiStruct, RADIOSS

AlphaSTAR provides engineers with a software suite that adds functionalities to commercial FEA packages. GENOA PFA (Progressive Failure Analysis) utilises advanced multiscale failure theories to predict the structural responses of composite materials, including polymer composite structures, hybrid composites and nano-composites, subject to static,fatigue, impact or thermal loadings. A detailed description of the material degradation is performed at the micro-scale which can account for the material defects, residual stresses, fibre strength statistics and interface mechanics.The progressive failure response described at the macro-scale is estimated from a decomposition of the FEA solution to the laminate, lamina and micro-scale using laminate and micro-stress theories.

AlphaSTAR’s solution also comprises tools for material characterisation and qualification: MCQ-Composites for tape, 2D/3D woven and braided materials and MCQ-Chopped for chopped fibre composites. MCQ software suite enables rapid modelling of un-notched specimens and evaluation of the properties and performance of the composite material. The software uses a mesh-less unit cell approach for assessing material behaviour, predicting laminate strength and failure mechanisms, generating design failure envelopes,parametric carpet plots and A-&B-Basis allowables. The material properties can then be used as input for a Finite Element analysis. 

For more information, please visit:

Post-Processing Damage in GENOA GUI - Typical 3 Point Bending Coupon (8Node Solid Element FE Model) – Courtesy of AlphaSTAR